Articles
Development of the photogrammetric crack measurer Technology
The observation of dynamics of crack formation in buildings, as well as the values of the disclosures of expansion joints in engineering structures is an important task for engineering surveys and geodetic monitoring....
deformation monitoring, engineering geodesy, photogrammetry, crack measurer
CHOOSING A CAMERA FOR CRACK MONITORING
The PhotoMicrometer software performs photogrammetric calibration of each photograph when processing the results of crack monitoring. This allows you to use almost any camera for monitoring and does not require its preliminary photogrammetric calibration. However, images taken with different...
PHOTOMICROMETER 1D/2D (announcement)
The Photomicrometer 3D photogrammetric system has been released in 2019 and has already established itself as an effective automated tool that allows to remotely perform high-precision monitoring of cracks and deformation seams along three coordinate axes. Today, the system is successfully used by...
PHOTOGRAMMETRIC TECHNOLOGY FOR REMOTE HIGH-PRECISION 3D MONITORING OF CRACKS AND DEFORMATION JOINTS OF BUILDINGS AND CONSTRUCTIONS
Monitoring of cracks and deformation joints of buildings and engineering constructions can be performed effectively using contemporary methods of photogrammetry. Our study allowed us to design the technology for such a monitoring. This technology is adapted for use by building operation and...
ABOUT THE PRODUCT
The photogrammetric crack-metering device (photo crack meter, in short) is a hardware and software complex for high precision three-dimensional monitoring of cracks, clearance and expansion joints....